1. Positive and negative staggered
Different rows on the same layer are stacked vertically at 90 degrees, and the stacking method for two adjacent layers of steel pallets is to rotate the other layer by 180 degrees. This method is similar to the bricklaying method in the building. The occlusal strength between different layers is higher, and the adjacent layers are not re-sewn, so the stability after accumulation is higher, but the operation is more laborious, and the packaging is not vertical. The faces bear the load to each other.
2. Rotating staggered
The two adjacent packaging bodies are 90 degrees to each other, and the stacking between the two layers is 180 degrees apart. In this way, the two adjacent layers are interlocked and interspersed with each other. The stability of the cargo body is high and it is not easy to collapse. The disadvantage is that it is difficult to pile up, and the base constitutes a cavity, which reduces the power of the steel pallet.
3. The crisscross pattern
Placed adjacent to each other is rotated 90 degrees, one layer is placed horizontally, and the other layer is placed vertically. There is a certain bite function between each layer, but the bite strength is not high.
4. Overlapping
That is, the stacking method of each layer is the same, and the top and bottom correspond. The advantage of this method is that the workers operate fast, the four corners and sides of the steel pallet are stacked vertically, and the load-bearing ability is great. The disadvantage is that there is a lack of occlusion between the layers, which is prone to collapse. In the case of low area and large area of goods, this method has satisfactory stability. If coupled with corresponding fastening methods, it will not only maintain stability, but also save the benefits of labor-saving loading and unloading operations.
